HYPERDESMO ® -LV is a low viscosity molded elastic film, polyurethane based, one component. It polymerizes with the humidity of the atmosphere and forms a monolithic waterproofing membrane with excellent adhesion on the whole surface. HYPERDESMO ® -LV is a material with a low viscosity micromolecular structure that allows its application with spray machines without the addition of solvent. It consists of pure, elastomeric, hydrophobic, polyurethane resin, which, together with special minerals, provides the product with excellent resistance to weather conditions, chemicals, solar UV radiation, mechanical and thermal stress.
Technical Details – Applications
- Helenite and sheet metal waterproofing
- Protection of gypsum boards and cement boards
- Asphalt and EPDM membrane protection
- Bathroom waterproofing
- Protection and waterproofing of terraces and balconies
- Roof waterproofing, roof waterproofing
- Waterproofing of parking spaces
- Protection and waterproofing of bridges
- Stage dripping
- Protection of irrigation canals
Aquadur primer
- Primer in applications with rising humidity / negative pressure (anchoring in tanks, swimming pools, foundations, etc.)
- Primer for other polyurethane or epoxy based systems, cementitious, etc.
- Concrete sealing coating
- Anchor for increased adhesion between old and new concrete
- Water / water vapor barrier
Hyperdesmo
- Helenite and sheet metal waterproofing
- Protection of gypsum boards and cement boards
- Asphalt and EPDM membrane protection
- Bathroom waterproofing
- Protection and waterproofing of terraces and balconies
- Roof waterproofing, roof waterproofing
- Waterproofing of parking spaces
- Protection and waterproofing of bridges
- Stage dripping
- Protection of irrigation canals
Alchemy LV
- Helenite and sheet metal waterproofing
- Protection of gypsum boards and cement boards
- Asphalt and EPDM membrane protection
- Bathroom waterproofing
- Protection and waterproofing of terraces and balconies
- Roof waterproofing, roof waterproofing
- Waterproofing of parking spaces
- Protection and waterproofing of bridges
- Stage dripping
- Protection of irrigation canals
Fibran Geotextile
Flexible sheet membrane for sealing small flat roofs (balconies and terraces) and bathrooms, interior walls and floors in bathrooms with permanent floor protection. It consists of a double sheet of thermoplastic polyolefin produced by co-extrusion. Each side is lined with non-woven polyester fibers for better adhesion of the tile adhesive / mortar used during installation.
Gravel for terrace
Inverted roof insulation with gravel the following stages of construction:
For sealing:
1. Coating the surface with asphalt varnish.
2. Creation of special pieces of asphalt membrane and installation.
3. Attach additional pieces of asphalt film to the vertical elements of the roof and glue the asphalt film in such a way as to facilitate the smooth flow of water.
Politile
- Composite thermal insulation of Polytile rooms, with Ravatherm XPS * . Polytile is the excellent and easy to install, inverted thermal insulation solution for rooms, significantly contributing to the reduction of building losses.
Extruded polystyrene R-50
- THE extruded polystyrene (XPS – Ex truded p olys tyrene) is a lightweight, heat-insulating material based on polystyrene . It is produced in plates by its method and has insulating properties due to gas entrapment in closed cells. Its main feature is the closed pores and the lack of water absorption, which makes the extruded polystyrene suitable for applications in high humidity. The production of extruded polystyrene is done by extrusion, during which polymerization of thermoplastic polystyrene. An important part of the product is a propellant gas with a low coefficient of thermal conductivity, which also offers a decelerating effect on fire.
Extruded polystyrene R-60
- THE extruded polystyrene (XPS – Ex truded p olys tyrene) is a lightweight, heat-insulating material based on polystyrene . It is produced in plates by its method and has insulating properties due to gas entrapment in closed cells. Its main feature is the closed pores and the lack of water absorption, which makes the extruded polystyrene suitable for applications in high humidity. The production of extruded polystyrene is done by extrusion, during which polymerization of thermoplastic polystyrene. An important part of the product is a propellant gas with a low coefficient of thermal conductivity, which also offers a decelerating effect on fire.
Extruded polystyrene R-70
- THE extruded polystyrene (XPS – Ex truded p olys tyrene) is a lightweight, heat-insulating material based on polystyrene . It is produced in plates by its method and has insulating properties due to gas entrapment in closed cells. Its main feature is the closed pores and the lack of water absorption, which makes the extruded polystyrene suitable for applications in high humidity. The production of extruded polystyrene is done by extrusion, during which polymerization of thermoplastic polystyrene. An important part of the product is a propellant gas with a low coefficient of thermal conductivity, which also offers a decelerating effect on fire.
